Accessories for Sentry Containment Hoods
A wide range of accessories to customize your Sentry Air Systems Containment Hood.
Anti-Static Clean & Polish Kit: Includes 8 oz. of solution and 10 reusable soft cloths wipes.Clear Anti-Static Vinyl Strip Curtains: Comes in 10” wide sections.
CaviCide™: Convenient, ready-to-use surface disinfectant that is effective against many harmful organisms. Available in two styles: 4 oz spray w/25 chemical resistant low particulate wipes or a 50 pack of chemical resistant low particulate wipes only.
Gas Sensor: Used with Acetone only. Detects gas concentrations near the surface of the filter outlet. It is factory calibrated based on current OSHA and NIOSH exposure limits (in PPM) for acetone. If the sensor detects concentrations above a certain level, the alarm will sound to alert the operator.
Hour Counter: Displays the amount of time the unit has been operating. This hour counter can be reset and helps maintain appropriate and consistent maintenance schedules. This item displays time down to 0.1-hour precision.
LED Light
UVC Light: safely decontaminates the hood’s surfaces.
The operator simply turns the UVC switch ON and the digital display starts counting down 120 seconds. The audible alarm and visual blinking LED indicator help notify the operator to leave the room for the UVC cycle. After the two-minute countdown, the UVC light stays lit for 15 minutes. For safety reasons, the operator must leave the room while the hood completes the UVC sterilization cycle.
Magnehelic Gage: Monitors the filter saturation. This item displays the static pressure on the filter in inches of water column. For use with HEPA, ASHRAE, or ULPA filters only.
Output Plenum: For Exterior Ducting/Converting into Positive Pressure Unit w/ Plenum Door
Portable Particle Counter: Measures indoor air quality. See PDF for full details.
Spill Trays: Prevent equipment and parts from sliding. Available in three styles.
Variable Speed Control: Control an infinite variation in airflow velocities.
Velometer: Measures the airflow of the unit in feet/minute. This accessory helps the operator know the airflow speed of the current fan setting which is helpful for units with a variable speed control.