Tablet Triturate Molds, 50 Cavity
These two-piece 50 cavity molds are great for making tablets as well as troches. Each mold consists of a base plate with pegs and a top plate with corresponding holes. To make tablets, place the top plate on a Glass Pill Tile or Ointment Slab then fill the holes evenly with the tablet paste using a hard rubber spatula to compress the mixture. When the paste has hardened, align the top plate over the base plate and press down to release tablets.
To make troches, simply cover one side of the top plate with tape, turning the holes into cavities. Fill the cavities with a syringe, and allow the mixture to cool. Remove the tape and place the top plate over the base plate, pressing down to remove the hardened troches.
Made of durable, corrosion-resistant anodized aluminum. Dishwasher safe. Marked with serial number for US DEA compliance. Available in three sizes: 60, 100 and 200 mg. All are 6 x 3 in. / 15.2 x 7.6 cm.
Mold Size | 60 mg | 100 mg | 200 mg |
Hole Size Ø x D: | 0.18 x 0.13 in. / 4.6 x 3.2 mm | 0.24 x 0.13 in. / 6.0 x 3.2 mm | 0.24 x 0.25 in. / 6.0 x 6.4 mm |
Hole Volume: | 0.053 ml | 0.090 ml | 0.181 ml |
Tablet Weight (density 0.7 g/ml): | 0.037 g | 0.063 g | 0.127 g |
Troche Weight (density 1.0 g/ml): | 0.053 g | 0.090 g | 0.181 g |
Texas customers: All purchases of this item are reported to the Texas DPS and require either a DEA or PCLA license